Saltillo Mexican Floor Tile Sealer. Glaze N Seal Wet Look 2000 5-Gal > 512334-3
Weight: 40 pounds
Our price: $329.00
This Saltillo floor tile sealer was designed for high-porous materials as the Saltillo tile is. It deeply penetrates creating a thick plastic film to protect your floor for the years to come.
Glaze 'N Seal Masonry & Concrete Lacquer is a crystal clear, high solids acrylic coating designed to protect and beautify Mexican Saltillo tile, Lincoln tile, concrete and masonry. This super-tough film was formulated for interior or exterior use. Walk on it, drive on it (it does reject organic stains). It offers ultimate protection in a clear finish.
Protects garage floors and driveways from oil stains. Eliminates concrete dusting and freeze-thaw problems. Protects patio and barbecue areas from food and grease stains. Saturation with Masonry & Concrete Lacquer will actually harden old and deteriorating mortar and plaster for added life. Independent laboratory tests rate Glaze 'N Seal superior for abrasion resistance, sunlight resistance and stain resistance qualities.
Use Indoors or Outdoors
Fast Drying and Long Lasting
Apply With Brush or Sprayer
Prevents Staining High Solids
Strong Resistance to Efflorescence
All surfaces must be free of efflorescence, dirt, oil, wax, grease and defective paint or sealers. If acid is used, all residue must be removed prior to application. Use Glaze 'N Seal Neutralizing Rinse to neutralize surface. Allow to
dry thoroughly before applying LACQUER.
Apply from 2-4 light, even coats (depending on porosity of surface) of "Wet Look" Lacquer with a natural brush or low pressure/airless sprayer (with metal or teflon tip). Allow 1 to 3 hours between coats or until surface is dry to the touch. Not recommended for dense or presealed surfaces such as glazed ceramic or quarry tile, marble or terrazzo.
100 to 400 square feet per gallon depending on the porosity of the surface.
To protect the sealer and extend life (indoors), use Glaze 'N Seal Masonry & Concrete Lacquer (Regular or Matte Finish) for a traffic coat. Sweep and damp mop floor frequently.
Always test a small area of surface to verify protection and appearance. NOT RECOMMENDED for glazed tile, marble, dense brick or dense slate. If in doubt, test surface.
All Rights Reserved. Fine Crafts & Imports, 2002-2013.